Store News and Updates
All orders shipped as of this morning that were placed during the break JK3D had. Now I am working to restock a few of the items that ran out while I was gone! Thanks for the orders and I liked … Continued
As promised shipping would start again on 9/25 and 90% of all the orders that came in from 9/11-9/24 just shipped tonight. There are a handful of outstanding orders that need to go out that should go on the 26th … Continued
I am taking a small break for a couple weeks from JK3D.us and will be back at it Sept 25th 2024! During this time away, orders can still be placed, but all orders placed after Sept 10th 10am (US Mountain time) will be shipped after September 25th in the order they came in. I am offering a coupon during that time for a 15% discount on all orders as a thanks and because of the delay on shipping items out during that time. The coupon code is “fall2024”.
Any questions during this time please email me at shop@jk3d.us
Due to the large amount of the JK3D.us seat slope mod kits sold for both the Yamaha Tracer 900/FJ09/Tracer 9GT, and Tracer 9GT+over the last almost 4 years around the world an interesting issue is starting to happen: Riders accidentally order the kit for their used Yamaha Tracer/FJ09 and find that it already had the kit installed by the previous owner! This has happened 3 times in the last 2 months.
Click the headline link to see how to identify if you have a kit installed.
Don’t be fooled by cheap knock-off imitations, scams, or other copies of JK3D.us products. The same people who rip off other people’s designs also are likely to rip you off (as is clearly the case with one of the Etsy stores that just takes people’s money and doesn’t ship their questionable products). JK3D.us products are ONLY sold through JK3D.us. Stick with the real deal!
After months of development work, testing, redesigns, more testing, etc… a handful of products are posted!
The CHIGEE AIO-5 Lite 1″ RAM Ball Mount
CHIGEE AIO-5 Camera GoPro mount
JK3D.us Motorsport Lens protector V3 that supports the INNOVV K6, and Chigee AIO-5 cameras as well as all other INNOVV K5, K3, K2 and C5 cameras.
Up next – Confirmation of INNOVV K7 and N1 camera fitment for the V3 lens protectors. And a few other special bits for the CHIGEE AIO-5 and XR-3
I am removing or making a lot of products special order as I try to streamline what I am selling and offering. I am going to be launching the JK3D Motorsports Lens protector V3 (for INNOVV and CHIGEE action cameras), and a number of other products I’ve been working on.
The remaining Lens Protector V2 with Mineral glass lenses are listed at a deep discount now to move them out as I found I had about 10 left. These are for the INNOVV K5 and K2/K3/C5 cameras.
I hope to have the V3, and all the CHIGEE stuff posted in the next few days!
The JK3D.us Dashcam Lens Protector has been upgraded (V3) for larger compatibility, featuring improved design, a bigger sapphire crystal, and streamlined appearance, launching May 2024. (Click above for more info!)
Hey everyone, Some customers have had an issue with some of the Tracer 9GTs with a fairing gap between the plastic and the tank when using the 8mm Seat Slope kit. A customer mentioned a great fix and I wanted to pass it along! (I added it to the instructions). Since this isn’t common on every bike Its been hard to track down a fix. (click on the post text above to see the full pic)
I am working on a number of enhancements, updates, and new products.
Some of them I can’t say quite yet, but one big one is the Lens protector for the INNOVV K6 camera. I have some prototypes designed and new sapphire crystal ordered for them. Since the housing is so much bigger than the K5 or K2/3 cameras, it requires a new crystal and bigger overall design. In time I may just standardize on the bigger/new design for all the cameras (with different TPU inserts).
I also have a different brand action cam setup coming in this week I will be starting to design protectors and mounts for.
Watch this space for more updates!
