JK3D.us Sapphire Motorsports Camera Lens Protector V3

Description

All V3 Lens Protectors ship with Sapphire crystal now as the lens option

 The JK3D.us Lens Protector has been in use in various versions since 2020 around the world.   Its sapphire main element is extremely scratch resistant and break resistant with only one recorded lens break happening over 6 years and that was from a rock so large it took the entire lens protector out but saved the camera. The cheaper, and lower quality acrylic protectors will be damaged in a single off road trip being pelted with sand and grit and can scratch just cleaning them of.   These lens protectors are also designed to keep water out from the area between the protector and the main camera ensuring a fog free and water free use.  Nothing else on the market compares to what these can do and have been tested with over 6 years in the field!

Carried over from previous generations: (why change what works??)

• Carbon Fiber Nylon-12 material used in the lens protector body – giving high durability, high strength, and chemical resistance.
• Printed into the structure is a forward super soft TPU Seal to hold the sapphire crystal and give an initial layer of dust and water resistance.
• Camera specific TPU rear seal/liner to give a secure and snug fit to the lens protector.

Updates from the V2:

• With new action and motorsports cameras having larger frames the V3 of the JK3D.us lens protector is bigger by 1.5mm to accommodate this.   Extensive testing has been conducted on all the cameras this is currently being sold for to ensure optical performance, and no vignetting (dark corners).
• The V3 lens protector is the same body for all cameras covered, the soft TPU insert is different for each model (See notes below)
• The design has been re-done from scratch changing every dimension in small ways – while the lens is larger and the overall diameter is 1.5mm larger, the screw closure area is smaller and more streamlined making the overall package smaller.
• Seal design has been refreshed to ensure better water resistance on all cameras. (Testing was done by leaving some cameras submerged in water for 12-24 hours, far exceeding IPX67 and other standards)

Each option is valid for 1x camera.  If you are ordering for Front and Rear cameras, be sure to order the right quantity based on the model of the camera.

INNOVV Camera Specific:

Note that the INNOVV K6, and K5 cameras have different sized/spec cameras on the front and rear. N2 2K cameras are also unique with a carbon fiber shim like the CHIGEE AIO cameras use.   Order the proper option for the front camera, and the rear cameras for both of those are the same as the N1/N2 Series, K7, K3, K2, C5.
Kit includes:

• 1x JK3D.us Motorsports Lens Protector V3 housing
• 1x Sapphire Lens
• 1x TPU Seal/Insert based on the model of camera ordered
• 1x 3mm Screw and Nylock nut
  
  

N2 2K camera Kit also Includes: (and is assembled similar to the CHIGEE camera below) 

• 1x INNOVV N2 2K Carbon Fiber Nylon shim
• 1x .8oz tube of E6000 cement

CHIGEE AIO-5 / XR-2 / AIO-6 Camera Specific: 

Since the AIO-5 / XR-2 / AIO-6 Cameras are conical it presented a challenge to adapt a lens protector.   For this case there is a special adapter being included with this kit that requires a high-quality glue to attach it.  For this reason, the AIO-5/6 kit will ship with a small tube of E6000 cement as part of the kit.   NOTE: This adapter will not change the functionality of the camera, but may not be able to be removed easily if you choose to not use the lens protector.  Because of the additional glue and Carbon Fiber Nylon adapter, the AIO-5/6 lens protector has an additional cost.
Kit Includes:

• 1x JK3D.us Motorsports Lens Protector V3 housing
• 1x CHIGEE Carbon Fiber Nylon shim
• 1x .8oz tube of E6000 cement
• 1x Sapphire Lens
• 1x CHIGEE Specific TPU Seal
• 1x 3mm Screw and Nylock nut

Install Instructions:

INNOVV Cameras: (Same instructions as the V2 series of lens protectors) https://jk3d.us/product-instructions/innovv-action-dashcam-lens-protector-install-care-instructions/

INNOVV N2 2K / CHIGEE Cameras: While the general use of the Lens protector is the same as the INNOVV there are specific install instructions for the CF Nylon Shim. https://jk3d.us/product-instructions/chigee-aio-5-lite-camera-lens-protector-v3-install-instructions/

Warranty:

JK3D will warranty the lens protector from any material or manufacturing defects for a period of 12 months from the order date, if you would like to file a warranty claim please email support@jk3d.us and include your order number, description of the issue, and picture of the defect/failure. This warranty does NOT apply to the glass element or damage caused normal use/wear and tear, or abuse. If you have issues please contact me.

Note: This lens product is NOT guaranteed to protect against all damages to your action/dashcam.   This product is designed to give additional protection to your action / dashcam from sand, dust, dirt, small debris.  Large road debris, gravel, rocks, or other extreme events will still likely damage the camera (and the lens protector itself).  There is no implied or guaranteed protection of any device outside of what is outlined here.