BMW GS Adv Cam Mount

Description

This is a simple camera mount that fits right over the main headlight on the F850 and F900GS Adventure bikes.    The camera is up high, and unobstructed, and close to the where the wiring for a DVR or Dash system may be.
The headlight is rigidly mounted so very little in the ways of vibration from the road or bouncing around.  Printed in a matte Carbon Fiber Nylon for extreme durability, and a subtle GS logo embossed on the side. 

Video of the camera mount in use on gravel/dirt/washboards with a Chigee AIO-6

The product picture is a Chigee AIO-6 camera (With JK3D.us Lens Protector installed), but this mount has options for many cameras, and if you don’t see yours listed in the options, select Other and I will work with you to get the specs on the camera to get a mount designed for it. (Note: Not all cameras can be mounted in this location Examples: INNOVV K5, INNOVV K6) 

What does it Fit?:

Any BMW that uses the same headlight as the F900GS Adventure, and has a windscreen with the gap above the bigger side of the headlamp: (this is the list I believe covers all the bikes, but there could be more I am missing). Aftermarket windscreens may not work with this.  Look at the pictures to see how this mount fits.

• 2024+ F900GS Adventure
• 2024+ F800GS
• 2017+ F750GS and F850GS and GS Adventure

What is it made out of? How does it mount?

This mount that uses the exposed black plastic above the headlight, an area that generally has a cut out on the windscreen as well (Verify yours does before ordering).

The Mount is made out of PA12 Carbon Fiber Nylon which is extremely resistant to the elements, damage, chemicals, and heat.  I have been using this material on motorcycle components for 8 years now with not a single failure. It is affixed with a high strength flexible 2 sided tape (Applied on the mount when it ships)  It is removable with no material changes to your motorcycle.  It is also removable leaving no marks on the bike if you want to remove it.

What is in the package:

• 1x JK3D.us BMW Specific forward camera mount with clamping screw and nut with 3M Heavy Duty silicone based adhesive tape precut and applied to the bottom.